 |
|
|
| |
|
|
|
|
|
|
- (1)
- (2)
- (2)
- (1)
- (5)
- (2)
- (11)
- (1)
- (1)
|
|
| |
|
|
Build Your Online Product Catalogs?
| Product Name: |
Split Casing Double Suction Pumps
|
| Supply Ability: |
|
| Related proudcts |
pump, single-stage pump, double suction pumps, |
| Specifications |
DSP series |
| Price Term: |
FOB |
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
General
Model S pump is a single-stage double-suction horizontal split centrifugal pump and used to transport pure water and the liquid of both physical and chemical nature similar to those of water, the maximum temperature of which must not be over 80â„? suitable for water supply and drainage in factories, mines, cities and electric stations, waterlogged land drainage and irrigation of farming land and carious hydraulic projects.
Structure
Both inlet and outlet of this pump are placed under the axial line, horizoutally and vertical to the axial line, the pump casing is opened in the middle so it is unneccessary to remove the water inlet and outlet pipelines and motor. The pump moves CW viewing from the clutch to it. The pump moving CCW can also be made, but it should be specially noted at order.
The main parts of the pump are: pump casing(1), pump cove(2)r, impeller(3), shaft(4), dual-suction seal ring(5), muff(6), bearing(15), etc. and all of them, except the axle which is made of quality carbo steel, are made of cast iron. The material maybe replaced with others upon different media.
Both pump casing and cover form the working chamber of the impeller and there are threaded holes for mounting vacuum and pressure meters on the flanges ant both inlet and outlet and for water draining on the lower side of them.
The impeller is static-balance calibrated, fixed with the muff and the muff nuts in both sides and its axial position can be adjusted via the nuts and axial force gets balanced by means of the symmetrical arrangement of its blades, there may be residual axial force which is borne by the bearing at the axle end.
The pump shaft is supported by two single-column centripetal ball bearing, which are mounted inside of the bearing body on both ends of the pump and lubricated with grease. The dualsuction seal ring is used to reduce the leak at the impeller.
The pump is driven directly by means of connecting to it via an clastic clutch.(set up a stand additionally in case of a rubber |
| Company: |
Hangzhou Delshine Industry&Trading Co Ltd
|
| Contact: |
Mr. Joe Chan |
| Address: |
Shangtang Rd |
| Postcode: |
310014 |
| Tel: |
86 571 86090322 |
| Fax: |
86 571 86090322 |
| E-mail: |
|
|
|
Home
